Filter
Price
- to
Brand
Type
Application
Connector type
Transmission speed
Transmission range
Modules for switchesFounded 23 wares:
Filter
Modules for switchesFounded 23 wares:
sort mode
  • price: Low to High
  • price: High to Low
  • newest
  • popular
  • expected
MikroTiK
New
...
SKU: XQ+85MP01D
3999 UAH*
in stock
Add this QSFP module for distances up to 100 meters to your CCR2216, CRS504 or CRS518 setups and enjoy real speed and ultimate reliability. This optical module offers four independent full-duplex channels with up to 25 Gbps per channel bandwidth and an aggregate bandwidth of 100 Gbps. The module has built-in digital diagnostic functions such as optical power monitoring. This is an optical module with MTP/MPO connector that requires Female-Female Type-B polarity MTP/MPO-12 optical cable
New
...
SKU: R11EL-FG621-EA
3999 UAH*
in stock
An extra cost-effective upgrade of our previous R11 LTE6 modem. It offers the same speed (up to 300 Mbps) and features as the earlier version, but the price is even lower. Also, it supports the popular B28 band.
New
...
SKU: R11EL-EC200A-EU
3229 UAH*
in stock
An extra cost-effective upgrade of our previous R11 LTE4 modem. It offers the same speed (up to 150 Mbps) and features as the earlier version, but the price is even lower now! Also, it supports the popular B28 band.
SKU: R11E-LR8
4099 UAH*
in stock
MikroTik R11e-LR8 is a miniPCIe hub card for LoRaWAN gateway based on Semtech SX1301 chipset. Provides LoRaWAN connectivity for any MikroTik product that is equipped with a miniPCIe slot with connected USB lines. Supports 8 different channels in the 863-870 MHz band, Listen Before Talk (LBT) and spectrum scanning. The maximum transmit output power is 20 dBm, the maximum sensitivity level at SF12 is 137 dBm.
SKU: S-4554LC80D
4088 UAH*
in stock
MikroTik Pair of SFP modules, S-45LC80D (1.25G SM 80km T1490nm/R1550nm, Single LC-connector) + S-54LC80D (1.25G SM 80km T1550nm. Pair of SFP 1.25G module for 80km links with Single LC-connectors. A pair of industrial temperature grade (-40°C to +85°C) modules for 80km links, includes one S-45LC80D and one S-54LC80D. SFP module S-45LC80D: 1.25G, SM, 80km, T1490nm/R1550nm, LC-connector, DDM. SFP module S-54LC80D: 1.25G, SM, 80km, T1550nm/R1490nm, LC-connector, DDM. Compatible with all MikroTik products, that have SFP or SFP+ cages.
SKU: GESP
1490 UAH*
in stock
RBGESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lighting or surge damages. Comes with the outdoor case and special grounding cable. Maximum suggested cable lenght is ~40 meters.
SKU: XS+31LC10D
7452 UAH*
in stock
This unit is a direct upgrade of our previous 10G SFP+ 10 km module: more functionality for the same price. We have added 25G SFP28 support – so you can use one module in all your setups. Perfect for the CCR2004-1G-12S+2XS connectivity router and any other multiport devices.
SKU: S-85DLC05D
897 UAH*
in stock
S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM
SKU: S-55DLC80D
1881 UAH*
in stock
Industrial temperature grade (-40°C to +85°C) SFP 1.25G module with Dual LC connector for long distance 80km links. Compatible with all MikroTik products, that have SFP or SFP+ cages.
SKU: S-31DLC20D
1104 UAH*
in stock
S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector, for up to 20 kilometer Single Mode fiber connections, with DDM. Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN, and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well.
SKU: Q+85MP01D
2199 UAH*
in stock
This is an optical module with MTP/MPO connector for 12-fiber array that requires Female-Female Type-B polarity MTP/MPO optical cable, which offers 4 independent full-duplex channels with up to 10 Gbps per channel bandwidth and aggregate bandwidth of 40 Gbps.
SKU: S-3553LC20D
3404 UAH*
in stock
S-35/53LC20D is a pair of SFP transceivers, the S-35LC20D is a 1.25G Single Mode optical SFP module with a LC connector, T1310nm/R1550nm, which works for connections up to 20km and supports DDM. The S-53LC20D is a 1.25G Single Mode optical SFP transceiver with an LC connector,T1550nm/R1310nm, which works for connections up to 20km and supports DDM. Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well.
SKU: RBPOE
166 UAH*
in stock
Low-cost PoE injector to power PoE devices through Passive PoE. Simply connect the power supply to the injector and then connect the injector to the RouterBOARD device using an Ethernet cable. Helps reduce the number of wires leading to the device. For use with RouterBOARDS which support power of PoE of 10-28 V entrance tension has to be not less than 18 V to offset any losses in cables.
SKU: RBGPOE
299 UAH*
in stock
The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. For using with any RouterBOARD that supports 18-57V; PIN 4,5 18-57V; PIN 7,8 RETURN.
New
...
SKU: GPER-IP67-CASE
299 UAH*
out of stock
Sturdy and affordable outdoor enclosure for GPeR units. It can be easily mounted on walls and poles. Despite the name, meticulous testing revealed that in real life the enclosure has an IP68 rating with protection from immersion in water, as well as protection from dust. Get an outdoor enclosure for the GPeR to safely extend Ethernet network in mines, caves, maintenance shafts or outdoors.
SKU: RBGPOE-CON-HP
1499 UAH*
out of stock
48 to 24V 10/100/1000Mbps PoE converter 802.3af support, 802.3at PoE plus support. This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices. Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output - up to 24W (up to 1A at 24V). You can power it with virtually any 42-57V PoE solutions available on market today (Passive, Telecom, 802.3af and 802.3at PoE plus supported). The device is a rugged metallic design, with high quality components and integrated heatsink design. The case also has mounting holes so you can attach it to a wall.
SKU: GPEN21
1966 UAH*
out of stock
The GPEN21 is a smart power injector that serves as an advanced software controlled repeater.
SKU: CWDM-MUX8A
15686 UAH*
out of stock
MikroTik CWDM-MUX8A is an 8 port dual fiber multiplexer for use with CWDM and SFP + CWDM SFP transceivers. This passive MUX/DEMUX device allows you to combine up to 8 VOLS into one in order to simplify and reduce the cost of installing a large VOLS. Coarse spectral multiplexing or optical channel multiplexing (CWDM) technology offers a solution to increase the throughput of the existing VOLS infrastructure by multichannel traffic/spreading several wavelengths over one fiber and reducing the cost of deploying new fiber lines.
SKU: GESP+POE-IN
708 UAH*
out of stock
You can’t buy safety, but you can buy MikroTik devices to keep your setup safe. Take a look at the GESP product line. It consists of a new revision of the classic MikroTik GESP surge protector and a brand new device – the GESP+POE-IN, a passive PoE injector with surge protection. Together these two devices offer maximum security and peace of mind.
SKU: S+85DLC03D
2714 UAH*
out of stock
S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connections. Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.
SKU: S+RJ10
3174 UAH*
out of stock
6-speed RJ-45 module for up to 10 Gbps. This unique module opens up a whole world of high speed connectivity possibilities, offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports. Any MikroTik device with active cooling that has SFP+ ports can now be used without installing any optical fiber, just plug the S+RJ10 and your network can be upgraded to 10 Gbps, making it ready for the next generation of RJ45 hardware.
SKU: S-RJ01
1380 UAH*
out of stock
S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Shipped with CCR1016-12S-1S+, by popular demand is now also available for purchase separately.
SKU: GPeR
1421 UAH*
out of stock
Gigabit Passive Ethernet Repeater. The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m. Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem. Maximum allowed length of CAT6 Ethernet cable between GPeR and power source/router is up to 100 m (depending on cable quality, high quality - up to 150 m). Maximum allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality). In case if the destination device does not support PoE-in powering, the PoE Passthrough can be disabled by manually removing all jumpers.
Menu
Products catalog
Products catalog