Danfoss Icon2: Intelligent and Effective Hydraulic Heating System control

Home New products Danfoss Icon2: Intelligent and Effective Hydraulic Heating System control
25.03.2024

In today’s world of technological innovation, the concept of a smart home is gaining more and more importance. Danfoss Icon2 opens up new horizons of comfort and efficiency for users. By introducing advanced technology and seamless compatibility, this system provides a confident step towards a future where managing home comfort is not only simple, but also more intuitive and effective.

Fast and without problems. The main controller has fewer components, and the in-app prompts are the key to a quick and easy installation.

Settings through the application. Installation, configuration and transmission – everything is easy and fast, because it is done via smartphone. Using the Danfoss Icon2 Commissioning App, you will be able to optimize the system operation step by step without excessive effort.

Elegant Thermostats

Wired and wireless thermostats with touch displays are distinguished by a compact form factor and an elegant design that will fit perfectly into any interior. In addition, the devices have a number of technical features!

Automatic screen off. On Danfoss Icon2 wired and wireless thermostats, the screen automatically turns off, so it is inactive 99% of the time and «merges» with the interior.

System compatibility. Wired and wireless 24 V room thermostats can be combined in one system.

Three new Icon2 Wireless Thermostats

  • Built-in or wall mounting
  • Two wires for easy installation
  • Ability to change the frame to any other

Danfoss Icon2 sensor

Danfoss Icon2 RT sensor

Danfoss Icon2 Featured RT sensor

Thanks to the infrared sensor, the floor surface temperature is measured.

The Icon 24 V Wire Thermostat is Available in Two Versions (Overhead and Built-in)

  • Compact size
  • Easy installation using magnets
  • Updated touch screen design
  • Integration into any open Zigbee 3.0 systems
  • Built-in humidity sensor

Danfoss Icon2 24V RT sensor, wall

​Danfoss Icon2 24V RT sensor, built into the wall

Simple Inside, Simple Outside

Thanks to the innovative cable fastening system, it will be possible to save time and effort, and the quick-mounting terminals ensure the possibility of installation with minimal use of tools.

The devices are only equipped with what is really needed: a user interface on the main controller with simple colored LEDs further improves the overall speed and ease of installation.

A Short Way to Smart Control

Hydraulic warm floor, radiator heating or both? The Danfoss Ally app provides full control over your home’s heating systems from anywhere, anytime. In addition, it easily integrates with smart assistants, including Amazon Alexa and Google Assistant.

Precise Temperature Control

By setting a specific temperature indicator, for example, 21 °C, you can be sure that the atmosphere will definitely correspond to the desired one – complete comfort and predictability.

The Application Control from Anywhere

For example, during a long vacation, the Danfoss Ally app allows you to easily adjust the heating before you leave or even while traveling. In particular, you can schedule less energy consumption for maximum savings.

Voice Control of both Radiators and Floor Heating

«Ok, Google, turn on the floor heating in the bathroom!».

Quick Connection to the Cloud

The Danfoss Ally gateway is the only additional device you will need to connect to the cloud and control all of your smart heating functions. Developed on the Zigbee 3.0 protocol, it allows you to make smart homes even smarter.

The Danfoss Ally gateway connects to the router and enables the Danfoss Ally application to «communicate» to the Danfoss Icon2.

Maintaining Optimal Balance in Each Room

Thanks to the automatic balancing of the Danfoss Icon2, the system will reduce the «on» time of circuits that require less heat, and give priority to circuits that require more heat. This is a kind of guarantee that the limited available energy will be distributed in the rooms in such a way as to ensure maximum comfort and efficiency.

Advantages of Automatic Balancing

  • Energy saving. A balanced system operates at a lower supply temperature.
  • Simple design. No complicated calculations as Danfoss Icon2 will take care of it.
  • Easy installation. The need for pre-configuration is minimized.
  • Comfort. More accurate temperature in each separate room of the house.

Easy Installation

Magnetic fastening. Thermostats can be installed wherever needed and almost effortlessly: you need to press the magnet to the wall in the desired position, and install the wireless thermostats on top.

Sophisticated elegance. Wireless thermostats are only 16 mm thick, so they will fit into any interior of the room.

Brief Description of Danfoss Icon2 Functions

Room Thermostats

+ Available

(+) An external floor sensor is required

÷ Unavailable

Version

Code number

Display

Humidity sensor

Floor sensor

Installation without tools

Open Zigbee 3.0

24 V

The possibility of replacing the frame

Danfoss Icon2 sensor

088U2120

÷

+

÷

+

+

 

 

Danfoss Icon2 Featured RT

088U2121

+

+

÷

+

+

 

 

Danfoss Icon2 RT

088U2122

+

+

+

+

+

 

 

Danfoss Icon2 24V RT sensor, built into the wall 80×80

088U2125

+

 

(+)

 

 

+

+

Danfoss Icon2 24V RT sensor, wall

088U2128

+

 

(+)

 

 

+

 

Main Controllers

Version

Wired and wireless room thermostats

Support of various heating devices

Automatic hydraulic balancing

Zigbee compatibility with Danfoss Ally and third-party systems

Switching to cooling mode by external signal

Supply temperature control

Various cooling applications

Danfoss Icon2, Basic

+

+

+

+

+

÷

÷

Danfoss Icon2, Advanced

+

+

+

+

+

+

+

Products from publication
SKU: 088U2100
11342 UAH*
in stock
Danfoss Icon 2 Main Controller is used for floor heating and cooling systems for individual room control. It can be configured as a wired or wireless system or as a combination, if required. The center of the system is the Danfoss Icon 2 Main Controller, which configures and ties the system together.
SKU: 088U2121
4562 UAH*
in stock
Danfoss Icon 2 RT is a series of wireless thermostats that offers the freedom to place your thermostat without the constraints of wires in the wall, The fade away feature, together with the minimalistic design, only 16 mm deep, gives it elegance and makes it blend in with the surroundings.
SKU: 088U2122
6992 UAH*
in stock
Danfoss Icon 2 RT is a series of wireless thermostats that offers the freedom to place your thermostat without the constraints of wires in the wall, The fade away feature, together with the minimalistic design, only 16 mm deep, gives it elegance and makes it blend in with the surroundings.
SKU: 088U2140
2724 UAH*
in stock
The TWA conversion module allows you to convert the 230 V drive outputs on the Icon2 master controller to 24 V outputs
SKU: 088U2125
3960 UAH*
in stock
Danfoss Icon2 24V wired room thermostats are used to control radiator heating and underfloor heating systems.
New
...
SKU: 088U2128
3905 UAH*
in stock
Danfoss Icon2 / 24V RT 24V thermostat offers a minimalistic design that makes them fade away and blend into surroundings when the display is not active. The thermostats uses powerline communication which makes installation very easy.
Accessories for goods from the publication
SKU: 088U1131
6713 UAH*
in stock
Icon Zigbee Repeater. Floor Heating Controls, Danfoss Icon, Zigbee repeater, 230.0 V, Number of channels: 0, Plug-in.
SKU: 088U1110
814 UAH*
in stock
Type: floor temperature sensor; Cable length: 3 m.
SKU: 088H3112
901 UAH*
in stock
Thermoelectric mini-actuators of the TWA series are designed for on-off control of various control valves in heating and heat-cold supply systems of local ventilation installations. The actuator is equipped with a visual travel indicator that indicates whether the valve is in the closed or open position.
SKU: 088H3113
901 UAH*
in stock
Thermoelectric mini-actuators of the TWA series are designed for on-off control of various control valves in heating and heat-cold supply systems of local ventilation installations. The actuator is equipped with a visual travel indicator that indicates whether the valve is in the closed or open position.
Menu
Products catalog
Products catalog