A type | Switch |
Ports | 24 x 10/100/1000Base-T |
Switch Type | customizable |
Number of ports | 24 |
A type | Switch |
Ports | 24 x 10/100/1000Base-T |
Switch Type | customizable |
Number of ports | 24 |
Transmission Method | Store-and-forward |
Indicators | Power (per device) |
Link/Activity/Speed (per port) | |
CPU nominal frequency, GHz | 0.5 |
Switching matrix | 48 Gbit/sec |
MAC Address Table | 8 k |
Jumbo frames | 10240 byte |
Packet transmission rate | 35.71 Mpps |
FLASH-memory | 16 MB |
Buffer Size | 512 KB |
Power consumption in the standby mode | 15.9 W |
Max. Power Consumption | 4.5 W |
RAM memory | 128 MB |
Standards and Protocols | IEEE 802.3 10BASE-T |
IEEE 802.3u 100BASE-TX | |
IEEE 802.3ab 1000BASE-T | |
IEEE 802.3ab | |
IEEE 802.3u | |
IEEE 802.3az | |
IEEE 802.3 | |
802.3az Energy Efficient Ethernet | |
Control | Web-based interface |
Functions | IGMP snooping |
Port Mirroring | |
802.3x Flow Control | |
Loopback Detection function | |
LLDP | |
Voice VLAN | |
IGMP Snooping Querier | |
D-Link Single IP Management | |
802.1D-2004 STP | |
802.1w RSTP | |
Many-to-One mode | |
One-to-One mode | |
IGMP v1/v2/v3 Snooping | |
Spanning Tree Protocol | |
Half/full duplex for 10/100 Mbps | |
Full duplex for 1000 Mbps | |
Cable diagnostics | |
Security | CB |
cUL | |
CCC | |
BSMI | |
Broadcast/Multicast/Unknown Unicast Storm protection | |
Traffic Segmentation | |
SSL | |
D-Link Safeguard Engine | |
Preventing attacks DoS | |
Certificates | cUL |
CB | |
CCC | |
BSMI | |
CE LVD |
Contents of delivery | Quick Setup Guide |
rubber feet | |
Power cord | |
mounting brackets for installation into a 19-inch rack | |
Installation kit | |
Switch |
Operating humidity | 0% to 95% |
Storage humidity | from 0% to 95% |
Heat dissipation | 54.3 BTU/h |
MTBF (Mean Time Between Failures) | 424762 h |
Operating temperature | -5 tо 50 °C |
Storage temperature | from -40 to 70 °C |
Dimensions, mm | 280 x 180 x 44 |
The weight | 1.32 kg |
Warranty | 12 months |
Width | 360 mm |
Height | 100 mm |
Length | 330 mm |
Weight | 2.18 kg |
Volume | 0.0119 m3 |
Take your Ethernet speeds to the next level with Gigabit Connectivity
Innovative D-Link Green power saving features keep your budget in check
Remote setup & management is easy, and can be done from anywhere.
D-Link Network Assistant Utility (DNA) can quickly discover and do initial setup for D-Link Networking devices such as the DGS-1100 Series, which greatly improves efficiency for solution deployment.
Relatively easy to set up, VLANs can be a big boon for your network. They can isolate sensitive areas of your network, providing more protection from those with malicious intent, or keeping bandwidth open for latency-sensitive traffic such as VoIP.
If VoIP calls make up a large slice of your network usage, separating them onto their own VLAN can ensure they get the bandwidth they need for smooth conversations without lag or jitters.
If you have surveillance cameras and devices attached to your network, putting them onto their own VLAN keeps surveillance footage running seamlessly. At the same time, it can help prevent a variety of malicious attacks by restricting access to different network areas.
D-Link Green technology enables the DGS-1100 Smart Managed Switches to save power without sacrificing performance. Most of the models in the series utilize a fanless design, for silent and energy-efficient operation. All are IEEE 802.3az-compliant and feature Link Status detection and Time-Based PoE.