Home - Products & Solutions for Enterprises - Network Equipment - Modules for switches - Netis - POE Injector EU Plug

Netis POE Injector EU Plug

SKU: PI-2

Description Where to buy (2) Additional (1)

Netis PI-2 PoE Injector fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af compliant PDs (Powered Devices) and PoE Splitter, to expand your network to where you wish to place PDs but has no power outlet. PDs include but are not limited to Access Point, IP Camera, VoIP Phones.

out of stock

* Recommended retail price

Where to buy Netis POE Injector EU Plug:

Go to the store

PoE-Инжектор Netis 1xFE LAN, 1xFE LAN PoE, 15W (PI-2)

Go to the store

POE інжектор Netis PI-2 Black 1xFE LAN, 1xFE LAN PoE, 15W

Images of Netis POE Injector EU Plug

Similar products to Netis POE Injector EU Plug:

D-Link SFP-Tranceiver 220R/20KM 1x100Base-BX-U, WDM, SM 20km, LC

SKU: 220R/20KM

644 UAH*

in stock

Where to buy

SFP-Transceiver 220R/20KM 1x100Base-BX-U, WDM, SM 20km, LC.

2E PowerLink PoE Injector PSE801, 1xFE, 1xFE PoE, 30W

SKU: 2E-PSE801

492 UAH*

in stock

Where to buy

The PoE injector 2E Powerlink PSE801 complies with IEEE 802.3at (PoE +) / 802.3af (PoE) Standards and is specifically designed for the simultaneous transmission of power (up to 30 W) to PoE-enabled devices that require higher-capacity power, such as IP cameras, wireless access points or IP-phones. While using them, you can place the PoE device almost anywhere in the building, for example, on the ceiling or wall, without any concern that there are no power outlets nearby. PoE injectors allow you to reap all the benefits of the Ethernet connection while providing PoE devices.

Tenda PoE injector 15W (Max. 48VDC) 1xFE, 1xFE PoE

SKU: PoE15F

399 UAH*

in stock

Where to buy

Type: PoE injector; Transmission speed: 100 Mbps; Connector type: FE, PoE; Standard PoE: IEEE 802.3af; Transmission range: 100 m.

2E PowerLink Gigabit PoE Injector PSE801G, 1xGE, 1xGE PoE, 30W

SKU: 2E-PSE801G

570 UAH*

in stock

Where to buy

The PoE injector 2E Powerlink PSE801G complies with IEEE 802.3at (PoE +) / 802.3af (PoE) Standards and is specifically designed for the simultaneous transmission of power (up to 30 W) to PoE-enabled devices that require higher-capacity power, such as IP cameras, wireless access points or IP-phones. While using them, you can place the PoE device almost anywhere in the building, for example, on the ceiling or wall, without any concern that there are no power outlets nearby. PoE injectors allow you to reap all the benefits of the Ethernet connection while providing PoE devices.

TP-Link PoE-injector TL-POE4824G 1xGE, 1xGE PoE, 18W Passive

SKU: TL-POE4818G

579 UAH*

in stock

Where to buy

TP-LINK TL-POE4824G is a PoE injector designed to transmit power and data over a single Ethernet cable. It is equipped with one gigabit Ethernet port capable of supplying power to other devices through PoE. The maximum power output of the device is 18 watts. It operates in passive PoE mode.

TP-Link PoE-injector TL-POE2412G 1xGE, 1xGE PoE, 12W, Passive

SKU: TL-POE2412G

559 UAH*

in stock

Where to buy

The TP-LINK TL-POE2412G PoE Injector is a device designed to transmit power and data over a single Ethernet cable. It features one gigabit Ethernet port and can supply power to other devices through PoE. The maximum power output of the device is 12 watts. It operates in passive PoE mode.

D-Link SFP-Tranceiver 220T/20KM 1x100Base-BX-D, WDM, SM 20km, LC

SKU: 220T/20KM

736 UAH*

in stock

Where to buy

SFP-Transceiver 220T/20KM 1x100Base-BX-U, WDM, SM 20km, LC.

TP-Link PoE-injector TL-POE4824G 1xGE, 1xGE PoE, 24W, Passive

SKU: TL-POE4824G

699 UAH*

in stock

Where to buy

The TP-LINK TL-POE4824G PoE Injector is a device that allows power and data transmission over a single Ethernet cable. It features one gigabit Ethernet port capable of delivering power via PoE to other devices supporting this technology. Its power output is 24 watts, and it operates in passive PoE mode.

MikroTiK Gigabit PoE injector

SKU: RBGPOE

299 UAH*

in stock

Where to buy

The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. For using with any RouterBOARD that supports 18-57V; PIN 4,5 18-57V; PIN 7,8 RETURN.