Description of 2E SD10000RTL, 10kVA/10kW, RT4U, LCD, USB, external battery, terminal in&out
The operation principle is that the input AC voltage is converted by the rectifier into DC, and then by the inverter – back into AC. Even in the presence of large deviations in the input voltage, 2E UPS continues to supply the connected devices with a pure sinusoidal stabilized voltage. The lack of switching between modes (mains to battery) allows to minimize the risk of damage to «sensitive» equipment. In particular, such UPSs are used for uninterrupted power supply of medical equipment, for data centers and enterprises with a continuous production cycle. The input voltage range is: 110 ~ 176 VAC (linear derating between 50% and 100% load); 176 ~ 288 VAC (no degradation). Input: single-phase three-wire (1F + N + PE). Output: single-phase (1F + N), adjustable voltage 208/220/230/240 V is provided.
The operating frequency range of 2E SD10000RTL model is within 40 ~ 70 Hz (automatic detection).
This UPS does not have internal batteries, instead you can use external 16-20 pcs., 12 V, 9 Ah.
In addition, various RS-232, USB and an optional SNMP adapter are provided. A multi-function LCD display built into the front panel displays the device’s operating status, including error codes.
With a weight of 14 kg, the device has dimensions of 440 × 580 × 88 mm. Installation type: universal (RACK/TOWER). The noise level is 58 dB. The product has IP20 protection degree, as well as protection against short circuit, overload, overheating, full battery discharge and fan check ability. ECO mode and microprocessor control are available.
Withstands overload up to 150% for 30 seconds.
Read full review ›