Type | drainage pump |
Maximum immersion depth | 7 m |
Impeller design type | free-flowing impeller |
Power consumption | 930 W |
Nominal current IN | 4.1 A |
Enable Type | direct online (DOL) |
Insulation class | F |
Cable type | H07RN-F |
Connection to the pipeline from the pressure side | G 1½ |
Type | drainage pump |
Application | for dirty water /(з невеликою кількістю піску та гравію) |
Maximum immersion depth | 7 m |
Impeller design type | free-flowing impeller |
Operating pressure | 1 bar |
Free spherical passage of hydraulics | 40 mm |
Ambient temperature T | 3 °C |
Motor type | electric /занурювальний двигун – з поверхневим охолодженням |
Mains connection | 1~230 V, 50 Hz |
Voltage tolerance | ±10 % |
Rated motor power P2 | 0.6 kW |
Power consumption | 930 W |
Nominal current IN | 4.1 A |
Enable Type | direct online (DOL) |
Nominal number of revolutions n | 2900 1/min |
The maximum switching frequency t | 30 1/h |
Insulation class | F |
Degree of water protection | IP68 |
Operating mode (submerged) | S1 |
Operating mode (in a non-immersed state) | S3-20% |
Cord length | 10 m |
Cable type | H07RN-F |
Cable cross-section | 3G1 mm² |
Plug | CEE7/7 (safety contact) |
Type of connecting cable | demountable |
Functions | float switch |
Engine protection | bimetallic |
Body material | gray cast iron |
Impeller | PK-GF30 |
Shaft | stainless steel |
Sealing material on the pump side | BXPFF |
Engine side sealing material | NBR |
Sealing material | NBR |
Engine material | stainless steel |
Connection to the pipeline from the pressure side | G 1½ |
Warranty | 12 months |
Width | 220 mm |
Height | 530 mm |
Length | 250 mm |
Weight | 16.50 kg |
Volume | 0.0292 m3 |
Sewage pump with free-flowing impeller and vertical threaded connection. The housing of hydraulics is made of gray cast iron, the working wheel is made of plastic. AC motor (1~) with surface cooling, with built-in running capacitor and automatically controlled motor thermal control. The motor housing is made of stainless steel. Oil-filled seal chamber with a double seal: a radial shaft seal is installed on the engine side, a sliding face seal on the pump side. Detachable connecting cable with float switch and mounted plug (CEE 7/7).
Note: If the pump is installed in the DrainLift WS 50 shaft, it is allowed to pump sewage with feces. The installation is approved according to EN 12050-1.