Home - Home Appliances, Tools and Household Goods - Home & Garden Appliances - Pumps - Optima - Pump station JET100-24, G 1, 3 cubic meters, 5.2 bar, 1.1 kW, 230V

Optima Pump station JET100-24, G 1, 3 cubic meters, 5.2 bar, 1.1 kW, 230V

SKU: 11993
Previous
Next
Technical characteristics Optima Pump station JET100-24, G 1, 3 cubic meters, 5.2 bar, 1.1 kW, 230V:
Main features
Full list of features
Type pumping station
Maximum immersion depth 9 m
Maximum head 50 m
Продуктивность 50 l/min , 3 м³/год
Voltage 220 V ± 5%
Frequency 50 Hz
Insulation class F
Key features
Type pumping station
Application for clean water
Maximum immersion depth 9 m
Maximum head 50 m
Supply temperature, max. 40 °C
Продуктивность 50 l/min , 3 м³/год
Engine
Voltage 220 V ± 5%
Frequency 50 Hz
Rated motor power P2 1.1 kW
Insulation class F
Degree of water protection IP44
Materials
Body material cast iron
Impeller латунь
Shaft stainless steel
Diffuser and ejector термопласт
Mechanical sealing кераміка і графіт
Additional information
Package Contents pump
гідроакумулятор на 24 літри
гребінець 5-ти ходовий 80мм (п'ятірник)
реле тиску PM-5
кабель з євровилкою та клемами 1.5
манометр 6 атм. 50мм сталевий корпус
Connection diameter 1 "
Additional information корпус електродвигуна охолоджується вентилятором
опори вала ротора - шарикопідшипники, вільно доступні для обслуговування
Warranty
Warranty 24 months
Package dimensions
Width 280 mm
Height 600 mm
Length 510 mm
Weight 17.34 kg
Volume 0.0857 m3
Optima automatic pumping stations are used to maintain the necessary pressure in the water supply systems of apartments, houses, cottages, etc. Thanks to their principle of operation, these units help to successfully solve problems that arise in cases where the water flow does not provide the necessary pressure or the object is supplied with water from a storage tank, well or well.
5329 UAH*
in stock
* Recommended retail price
Where to buy: Optima Pump station JET100-24, G 1, 3 cubic meters, 5.2 bar, 1.1 kW, 230V:
Online stores
Comtrading
Насосная станция Optima JET100-24, G 1, 3м куб., 5.2 бар, 1.1 кВт, 230В (11993)
Iphouse.com.ua
Насосна станція Optima JET100-24
Itbox
Насосная станция Optima JET100-24, G 1, 3м куб., 5.2 бар, 1.1 кВт, 230В (11993)
Mekka
Насосная станция Optima JET100-24, G 1, 3м куб., 5.2 бар, 1.1 кВт, 230В (11993)
Moyo
Насосная станция Optima JET100-24, G 1, 3м куб. (11993)
National networks
24 Moyo.ua
Насосная станция Optima JET100-24, G 1, 3м куб. (11993)
Designed for installation in individual water supply systems, pumping clean water from wells, wells and open water bodies. They can also be used for watering vegetable gardens, irrigating gardens, etc.

Optima pumping stations consist of a pump, a set of automation (pressure relay and manometer), and a storage tank. The pressure switch controls the operation of the pump to maintain the pressure in a given range. The presence of a manometer allows you to control the pressure. The accumulative capacity contributes to the comfortable consumption of water.

Centrifugal pump Optima JET100 1.1 kW cast iron long is intended for pumping clean water and chemically non-aggressive liquids. It can be used in everyday life and industry, for automatic water supply in a complex with tanks and automatic pressure support units, for watering vegetable gardens, gardens, etc. Install in places protected from atmospheric influences.

Optima JET100 1.1 kW cast iron is a centrifugal type pump with a single impeller. Pressure in centrifugal pumps is created due to the centrifugal force that occurs when the blades of the impeller act on the liquid. The water lifting depth up to 9m is achieved thanks to the ejector (venturi tube) installed in the pump housing. The absorbed liquid is only partially fed into the discharge nozzle. The remaining part of the water recirculates through the ejector, which, being connected to the suction chamber, creates a vacuum in it, necessary for raising the water. Before start-up, it is necessary to pour water into the pump part. Thanks to the Venturi system, the problem of pumping liquids containing air is solved.

  • The pumping part is made of cast iron
  • The working wheel is brass
  • Diffuser and ejector - thermoplastic
  • The rotor shaft is stainless steel
  • Mechanical sealing - ceramics and graphite
  • The motor housing is cooled by a fan
  • The rotor shaft supports are ball bearings, freely accessible for maintenance
  • Degree of motor protection IP44
  • Insulation class F. Mains voltage: 230V-50Hz
  • A thermal protection relay is built into the engine
Menu
Products catalog
Products catalog