Graphite
SKU: 56H543
80 UAH*
out of stock
The GRAPHITE impact bits (ref. 56H543) type PH1/2/3, with a total length of 50 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit.
SKU: 56H901
80 UAH*
in stock
Магнитный угольник - фиксатор для сварки GRAPHITE, позволяет зафиксировать свариваемые детали под углом 45° или 90°. Сильные ферритовые магниты придерживают свариваемые детали, благодаря чему у сварщика обе руки свободны.
SKU: 56H902
135 UAH*
in stock
Магнитный угольник - фиксатор для сварки GRAPHITE, позволяет зафиксировать свариваемые детали под углом 45° или 90°. Сильные ферритовые магниты придерживают свариваемые детали, благодаря чему у сварщика обе руки свободны.
SKU: 56H903
225 UAH*
in stock
Магнитный угольник - фиксатор для сварки GRAPHITE, позволяет зафиксировать свариваемые детали под углом 45° или 90°. Сильные ферритовые магниты придерживают свариваемые детали, благодаря чему у сварщика обе руки свободны. Дополнительное отверстие позволяет легко оторвать магнит после окончания работы.
SKU: 56H904
110 UAH*
in stock
Магнитный угольник - фиксатор для сварки GRAPHITE, позволяет зафиксировать свариваемые детали под углом 45°, 60°, 75°, 90° или 135°. Сильные ферритовые магниты придерживают свариваемые детали, благодаря чему у сварщика обе руки свободны.
SKU: 56H905
245 UAH*
in stock
Магнитный угольник - фиксатор для сварки GRAPHITE, позволяет зафиксировать свариваемые детали под углом 45°, 60°, 75°, 90° или 135°. Сильные ферритовые магниты придерживают свариваемые детали, благодаря чему у сварщика обе руки свободны.
SKU: 56H542
80 UAH*
in stock
The GRAPHITE impact bits (ref. 56H542) type PZ1/2/3, with a total length of 50 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit.
New
SKU: 56H540
80 UAH*
in stock
The GRAPHITE impact bits (ref. 56H540) type PH1/2/3, PZ1/2/3, with a total length of 25 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit.
SKU: 56H541
80 UAH*
in stock
The GRAPHITE impact bits (ref. 56H541) type TX10/15/20/25/30/40, with a total length of 25 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit.
SKU: 58G092
929 UAH*
out of stock
Medium bag for power tools Energy+ GRAPHITE with a capacity of 18.5 L, made of polyester. The bag is equipped with 8 internal pockets, 2 internal tool loops and 7 external pockets, allowing you to organize your tools and their safe transport.
SKU: 58G088
3 490 UAH*
in stock
Set of durable GRAPHITE Energy+ power tool bags held on a rack with a telescopic handle and wheels for unhindered mobility during work. Large bag capacity facilitates transport of numerous power tools, hand tools and accessories. Robust, densely weaved and internally laminated material guarantees long life, resistance to abrasion as well as protection against moisture and unfavourable weather conditions.
SKU: 58G010
1 615 UAH*
out of stock
Двухскоростная ударная дрель-шуруповерт GRAPHITE, работающая с аккумуляторными батареями 18 В Li-Ion GRAPHITE Energy+. Электроинструмент с плавной регулировкой частоты вращения, оснащен переключателем направления вращения. Самозажимной патрон позволяет использовать оснастку диаметром 2-13 мм. Максимальная частота вращения шпинделя на первой скорости составляет 350 оборотов в минуту, а на второй скорости - 1250. Частота механического удара на первой скорости составляет 5250 ударов в минуту, а на второй скорости - 18750.
SKU: 56H550
45 UAH*
in stock
GRAPHITE impact socket (ref. 56H650) measuring 6 x 65 mm. Designed for heavier work with high torque using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The magnetic tip prevents the bit from falling out during the work.
SKU: 56H551
45 UAH*
in stock
GRAPHITE impact socket (ref. 56H651) measuring 8 x 65 mm. Designed for heavier work with high torque using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The magnetic tip prevents the bit from falling out during the work.
SKU: 56H552
45 UAH*
in stock
GRAPHITE impact socket (ref. 56H652) measuring 10 x 65 mm. Designed for heavier work with high torque using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The magnetic tip prevents the bit from falling out during the work.
SKU: 56H553
50 UAH*
in stock
GRAPHITE impact socket (ref. 56H653) measuring 13 x 65 mm. Designed for heavier work with high torque using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The magnetic tip prevents the bit from falling out during the work.
SKU: 55H756
35 UAH*
in stock
GRAPHITE flap wheel, diameter 40 mm, width 20 mm, used for grinding wood, metal and plastic surfaces. Wheel consists of robust, flexible flaps made of abrasive cloth for perfect fit to all machined surfaces. Flaps fixed to a 6 mm diameter fixing spindle to facilitate its use in face grinders, drills and screwdrivers.
SKU: 55H757
45 UAH*
in stock
GRAPHITE flap wheel, diameter 60 mm, width 30 mm, used for grinding wood, metal and plastic surfaces. Wheel consists of robust, flexible flaps made of abrasive cloth for perfect fit to all machined surfaces. Flaps fixed to a 6 mm diameter fixing spindle to facilitate its use in face grinders, drills and screwdrivers.
SKU: 55H758
45 UAH*
in stock
GRAPHITE flap wheel, diameter 60 mm, width 30 mm, used for grinding wood, metal and plastic surfaces. Wheel consists of robust, flexible flaps made of abrasive cloth for perfect fit to all machined surfaces. Flaps fixed to a 6 mm diameter fixing spindle to facilitate its use in face grinders, drills and screwdrivers.
SKU: 56H870
470 UAH*
in stock
Электрододержатель изолированный GRAPHITE (арт. 56H870), обеспечивает эффективную сварку покрытыми электродами в каждой позиции. Мощная пружина и высокое качество зажимных губок обеспечивают крепкий захват электрода.
SKU: 56H871
535 UAH*
in stock
Электрододержатель изолированный GRAPHITE 200А обеспечивает эффективную сварку покрытыми электродами в каждой позиции. Мощная пружина и высокое качество зажимных губок обеспечивают крепкий захват электрода.
SKU: 56H872
655 UAH*
in stock
Электрододержатель изолированный GRAPHITE 315A обеспечивает эффективную сварку покрытыми электродами в каждой позиции. Мощная пружина и высокое качество зажимных губок обеспечивают крепкий захват электрода.
SKU: 56H880
200 UAH*
out of stock
Сварочные клещи GRAPHITE 160А благодаря сильной пружине обеспечивают быстрое и надежное крепление сварочного провода массы. Медные накладки на губках улучшают проводимость электрического тока во время сварки.
Menu
Products catalog
Products catalog